View ST1230C16K0_458074.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Previous Datasheet
Index
Next Data Sheet
Bulletin I25194/A
ST1230C..K SERIES
PHASE CONTROL THYRISTORS Hockey Puk Version
Features
Center amplifying gate Metal case with ceramic insulator International standard case A-24 (K-PUK) High profile hockey-puk
1745A
Typical Applications
DC motor controls Controlled DC power supplies AC controllers
case style A-24 (K-PUK)
Major Ratings and Characteristics
Parameters
IT(AV) @ Ths IT(RMS) @ Ths ITSM @ 50Hz @ 60Hz I 2t @ 50Hz @ 60Hz V DRM /V RRM tq TJ typical
ST1230C..K
1745 55 3200 25 33500 35100 5615 5126 800 to 1600 200 - 40 to 125
Units
A C A C A A KA2s KA2s V s C
D-391 To Order
Previous Datasheet
Index
Next Data Sheet
ST1230C..K Series
ELECTRICAL SPECIFICATIONS Voltage Ratings
Voltage Type number Code
08 ST1230C..K 12 14 16
V DRM /V RRM , max. repetitive peak and off-state voltage V
800 1200 1400 1600
VRSM , maximum nonrepetitive peak voltage V
900 1300 1500 1700
I DRM /I RRM max.
@ TJ = TJ max
mA
100
On-state Conduction
Parameter
I T(AV) Max. average on-state current @ Heatsink temperature I T(RMS) Max. RMS on-state current I TSM Max. peak, one-cycle non-repetitive surge current
12 ST1230C..K
1745 (710) 55 (85) 3200 33500 35100 28200 29500 A
Units Conditions
A C 180 conduction, half sine wave double side (single side) cooled DC @ 25C heatsink temperature double side cooled t = 10ms t = 8.3ms t = 10ms t = 8.3ms t = 10ms KA2s t = 8.3ms t = 10ms t = 8.3ms KA2s No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max.
I2 t
Maximum I2t for fusing
5615 5126 3971 3625
I 2 t
Maximum I2t for fusing
56150 0.93
t = 0.1 to 10ms, no voltage reapplied (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max.
V T(TO)1 Low level value of threshold voltage V T(TO)2 High level value of threshold voltage rt1 rt2 V TM IH IL Low level value of on-state slope resistance High level value of on-state slope resistance Max. on-state voltage Maximum holding current Typical latching current
V 1.02 (I > x IT(AV)),TJ = TJ max.
2222222222222
0.17 m 0.16 1.62 600 mA 1000 T J = 25C, anode supply 12V resistive load V (I > x IT(AV)),TJ = TJ max. Ipk= 4000A, TJ = TJ max, tp = 10ms sine pulse (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max.
D-392 To Order
Previous Datasheet
Index
Next Data Sheet
ST1230C..K Series
Switching
Parameter
di/dt Max. non-repetitive rate of rise of turned-on current t t
d
ST1230C..K
1000 1.9
Units Conditions
A/s Gate drive 20V, 20, t 1s TJ = TJ max, anode voltage 80% VDRM Gate current 1A, di g/dt = 1A/s V = 0.67% VDRM, TJ = 25C d ITM = 550A, TJ = TJ max, di/dt = 40A/s, VR = 50V dv/dt = 20V/s, Gate 0V 100, t = 500s p
r
Typical delay time Typical turn-off time
s
q
200
Blocking
Parameter
dv/dt IRRM IDRM Maximum critical rate of rise of off-state voltage Max. peak reverse and off-state leakage current
ST1230C..K
500 100
Units Conditions
V/s mA TJ = TJ max. linear to 80% rated VDRM TJ = TJ max, rated V DRM/V RRM applied
Triggering
Parameter
PGM Maximum peak gate power
23 ST1230C..K
16 3 3.0 20 V 5.0 TYP. 200 MAX. 200 3.0 10 0.25 mA V TJ = TJ max V mA TJ = - 40C TJ = 25C TJ = 125C TJ = - 40C TJ = 25C TJ = 125C Max. gate current/voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Max. required gate trigger/ current/ voltage are the lowest value which will trigger all units 12V anode-to-cathode applied TJ = TJ max, t 5ms p W A
Units Conditions
TJ = TJ max, t p 5ms TJ = TJ max, f = 50Hz, d% = 50 TJ = TJ max, t p 5ms
PG(AV) Maximum average gate power IGM +VGM -VGM Max. peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage
IGT
DC gate current required to trigger 100 50 1.4
VGT
DC gate voltage required to trigger
1.1 0.9
IGD VGD
DC gate current not to trigger DC gate voltage not to trigger
D-3933333 To Order
Previous Datasheet
Index
Next Data Sheet
ST1230C..K Series
Thermal and Mechanical Specification
Parameter
TJ T
stg
ST1230C..K
-40 to 125 -40 to 150 0.042 0.021 0.006 0.003 24500 (2500)
Units
C
Conditions
Max. operating temperature range Max. storage temperature range
RthJ-hs Max. thermal resistance, junction to heatsink RthC-hs Max. thermal resistance, case to heatsink F Mounting force, 10%
DC operation single side cooled K/W DC operation double side cooled DC operation single side cooled DC operation double side cooled N (Kg) g See Outline Table
K/W
wt
Approximate weight Case style
425 A-24 (K-PUK)
RthJ-hs Conduction
(The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC)
12
Sinusoidal conduction Conduction angle
Single Side Double Side 180 120 90 60 30 0.003 0.004 0.005 0.007 0.012 0.003 0.004 0.005 0.007 0.012
Rectangular conduction Units
Single Side Double Side 0.002 0.004 0.005 0.007 0.012 0.002 0.004 0.005 0.007 0.012 K/W TJ = TJ max.
Conditions
Ordering Information Table
Device Code
ST 123
1 2
0
3
C
4
16
5
K
6
1
7 8
1 2 3 4 5 6 7
-
Thyristor Essential part number 0 = Converter grade C = Ceramic Puk Voltage code: Code x 100 = VRRM (See Voltage Rating Table) K = Puk Case A-24 (K-PUK) 0 = Eyelet terminals (Gate and Auxiliary Cathode Unsoldered Leads) 1 = Fast-on terminals (Gate and Auxiliary Cathode Unsoldered Leads) 2 = Eyelet terminals (Gate and Auxiliary Cathode Soldered Leads) 3 = Fast-on terminals (Gate and Auxiliary Cathode Soldered Leads) 2222222222222
8
-
Critical dv/dt: None = 500V/sec (Standard selection) L = 1000V/sec (Special selection)
D-394 To Order
Previous Datasheet
Index
Next Data Sheet
ST1230C..K Series
Outline Table
1 (0.04) MIN. TWO PLACES 2 7.5 (1.0 8) M A X . 47.5 (1.87) DIA. MAX.
TWO PLACES
PIN RECEPTACLE AMP. 60598-1
Case Style A-24 (K-PUK)
67 (2.6) DIA. MAX.
All dimensions in millimeters (inches)
20 5 7 4.5 (2.9 ) D IA . M A X . 4.75 (0.2) NOM.
23
44 (1.73) 2 HOLES DIA. 3.5 (0.14) x 2.1 (0.1) DEEP
CREPAGE DESTANCE 28.88 (1.137) MIN. STRIKE DISTANCE 17.99 (0.708) MIN.
Maximum Allowable Heatsink Temperature (C)
Maximum Allowable Heatsink Temperature (C)
130 120 110 100 90 80 70 60 50 40 0 200 400 30
ST1230C..K Series (Single Side Cooled) R thJ-hs (DC) = 0.042 K/W
130 120 110 100 90 80 70 60 50 40 30 20 0 400 30
ST1230C..K Series (Single Side Cooled) R thJ-hs(DC) = 0.042 K/W
Conduction Angle
Conduction Period
60
90 120 180
60
90
120
180
DC 1600 2000
600
800 1000 1200 1400
800
1200
Average On-state Current (A)
Average On-state Current (A)
Fig. 1 - Current Ratings Characteristics
Fig. 2 - Current Ratings Characteristics
D-3953333 To Order

▲Up To Search▲

Price & Availability of ST1230C16K0

	To Download ST1230C16K0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .